Chipping B13 ECU's

I can chip B13 ECU's. This operates much like a Calum Basic ECU. You can change the chips at any time with a new bin burned into it to upgrade the tune or setup.

I will chip and install the bin of your choice into the ECU for $100 and program a new chip for $15 or an old chip you already have for $5, shipping extra.

Damnit! I wish you could do B14's!! I might get one just for shits and giggles. That is super cool that you are getting to that!

Convert, that is what i am doing. Trust me, it will be worth it. More info to come.

Can you make a conversion harness?

Possibly, i think i will use the B13 harness and just swap the dist connector to use the B14 one. I will see if i can find a conversion harness somewhere.

Good stuff. Glad someone local is doing it. I was going to start chipping as well after Calum stop. I was going to try to do B14/S14's as well. But, after a lot of thinking it over LONG AND HARD. Decided NOT to do it.

nismos13silvia wrote:

Good stuff. Glad someone local is doing it. I was going to start chipping as well after Calum stop. I was going to try to do B14/S14's as well. But, after a lot of thinking it over LONG AND HARD. Decided NOT to do it.

I cant find the chip sets, otherwise i would. Or is it the same for the B14's?

p10's fit in there anywhere?

Yours is OBDI, same as B13, can be chipped.

squirlz wrote:

nismos13silvia wrote:

Good stuff. Glad someone local is doing it. I was going to start chipping as well after Calum stop. I was going to try to do B14/S14's as well. But, after a lot of thinking it over LONG AND HARD. Decided NOT to do it.

I cant find the chip sets, otherwise i would. Or is it the same for the B14's?

I believe they're NOT the same.

Could you burn me a chip that will work in a jwt ecu?

I am currently running a jwt b13 ecu in my car and i want the injector sizes changed.

insane imports wrote:

Could you burn me a chip that will work in a jwt ecu?

I am currently running a jwt b13 ecu in my car and i want the injector sizes changed.

Most likely. i will make the order soon. If you could pop the top open and get a part number off of the chip or better yet take a picture of the chip. I will check to make sure i can get and burn that chip, i think i have heard others doing it so it should be possible.

I dont think you are able to put other chips in JWT's ECUs... If you can that would be fucking awesome!

Good stuff, Nick. This will give a lot of the midwest guys versatility and options.

I know you can pull the bin off of the JWT's. I am not sure on re chipping them though. We will figure it out.

Yes I have heard you can pull the bin as well, but not the chips.

That sucks, well for a $100 you can put that bin on another ECU and be able to switch at any time for at most $15, and sell the JWT.

Ordered the chips today, i have a harness thanks to Josh, and i should have an ECU by next week some time. I just have to swap a few connectors and it should be ready to go.

Are you making a conversion harness then?

I would like to, i am just converting the 4 plugs i need to so i can use the B13 engine harness in my B14. If i can find the sockets and pins i will make them.

What would you need to make it?

The male (Harness) side for the B13 and the female (ECU) side from the B14. Pins for each and a crimper.

I cant find them for crap. but what i could do is get a bunch of B13 harnesses that are junk, or from a GA, and get a junk B14 ecu and make them that way. I wouldnt want to make too many but i guess it is possible. If i make some sort of jig it probably would not be too bad. So, if you want one then yes, i will make one.

NIck, in response to your voicemail, thats fine, you can borrow it for as long as you need. I might be able to swing it by your work tomorrow afternoon. I've been working twelve hour days lately and haven't had a chance to call, but I'll give you a call tomorrow.

I think i have 2 OBDII ECUS and 1 OBD1. I think I might want to keep one of the OBDII but if you need one of the other 2 let me know.