3" B14 exhaust.

Posts : 42 Join date : 2010-04-11

I am selling a 3" mandrel bent cat back exhaust. It was made by Andreas Miko, it features a 3" perforated core resonator and a 3" magnaflow muffler, it has a 4" polished tip. It also includes a test pipe with an O2 sensor bung welded in. I modified the exhaust flange and as such if you wanted to bolt this to a factory cat you would have to cut the flange and rotate it to match the clocking on the factory cat. Sounds hard but honestly for an exhaust shop it might take them 30 minutes.

This exhaust has been on my car for a few years, it is a track only car and as such has never seen winter, and has only seen rain once.... It is in good condition however the polished tip has tarnished and has some surface scratches.

I am firm on the price at $300. I have only posted here so far as I would prefer to sell it locally (I am in Kenosha WI).

This pic. is of the exhaust when it was new, I am only showing it so that you can see what you are getting. I will have some updated pics. avail. in a few days. If you would like some drop me a line.

3" B14 exhaust. 544197354_6TaFg-M

Wes

Subject: Re: 3" B14 exhaust. Sun Apr 11, 2010 11:55 pm

Son of a...!

It's too bad FedEx is dropping off my new exhaust tomorrow...

Subject: Re: 3" B14 exhaust. Mon Apr 12, 2010 6:45 am

hmmmm I might bite on this, its either this or side exit. I will think it over.

Posts : 8 Join date : 2009-11-18

Ben, i'd say get this. You will get hassled too much with side exit

Subject: Re: 3" B14 exhaust. Wed Apr 14, 2010 11:18 pm

On the other hand, side exit would be very bad ass.

Posts : 42 Join date : 2010-04-11

Ehh. side exit kind sucks.... Lots of people have done it, and honestly I have yet to hear one that I think sounds good. Unless it is a dedicated track car, I can't see not running some sort of muffler.

Posts : 127 Join date : 2009-11-21 Age : 36

how hard would this be to put on a 4 door sentra?

Subject: Re: 3" B14 exhaust. Sun Apr 18, 2010 9:55 pm

B14 is a B14, there isn't a difference in the length of the chassis. The cat length is your only issue, but considering this comes with a test pipe that issue is already taken care of.

Posts : 127 Join date : 2009-11-21 Age : 36

Posts : 42 Join date : 2010-04-11

Yes it should bolt in place with the test pipe. This assumes whatever header or secondary you are using connects to the factory cat. The nice thing about the test pipe is that it would be easy for a muffler shop to lenghten or shorten it in the unlikely event something was needed...

Posts : 127 Join date : 2009-11-21 Age : 36

the car will not use a cat if we don't have to. PM me your phone number and I will hit u up Monday or Tuesday.

Posts : 42 Join date : 2010-04-11

Sale Pending

Posts : 42 Join date : 2010-04-11

SOLD! Thanks Mitch and co!

Posts : 127 Join date : 2009-11-21 Age : 36

Thank You Wes!, LMK when you want to get rid of those seats and other stuff!

» B14 200sx Magnaflow 2.5" cat. back exhaust
» HKS cat. back exhaust for B15
» 3/8" Exhaust Flanges, 3", 2 1/2", 2 1/4"
» 3" V-Band Clamp
» Bluebird motor 2.5" downpipe